|
OEM Guide Page HWH SpaceMaker Equipment for HARMAR, INC. Vehicles (File: MR403000.DOC | Revised: 24MAR17) |
|
PROCEDURE: 1.
Locate the HWH identification tag on the SpaceMaker mechanism to get
the correct mechanism part number. 2.
Find the correct SpaceMaker mechanism part number in the left column
below. 3. Refer to the listed HWH Parts
Manual Page for general replacement parts information and item number
arrangements. 4. Note that two-cylinder mechanisms
with a synchronizing cylinder have two part numbers. One number is for the left assembly and one
is for the right assembly. If the mechanism
assembly originally had one number, that number is listed with the new
numbers. |
SLIDE-OUT
Mechanisms
|
||
|
MECHANISM AP17637 AP18164 |
DUAL
CYLINDER ROOM EXTENSION
36.0 STROKE (WITH SYNCHRONIZING CYLINDER)
AP17636 KIT SEE > MR412005.HTML FOR DRAWING AND PARTS INFORMATION. |
|
|
CYLINDER
ASSEMBLY___________ SYNCHRONIZING
CYLINDER______ TUBE
KIT____________________ |
ITEM 1 RAP90518 (36.5 STROKE) REPLACES AP15251 ITEM 3 RAP90474 (14.63 STROKE) REPLACES AP12484 ITEM 2 RAP90480 REPLACES
AP13252 |
|
|
MECHANISM AP18166 AP18167 |
DUAL
CYLINDER ROOM EXTENSION
24.0 STROKE (WITH SYNCHRONIZING CYLINDER) AP18165
KIT SEE > MR412005.HTML FOR DRAWING AND PARTS INFORMATION. |
|
|
CYLINDER
ASSEMBLY___________ SYNCHRONIZING
CYLINDER______ TUBE
KIT____________________ |
ITEM 1 RAP90484 (24.5 STROKE) REPLACES AP15252 ITEM 3 RAP90472 (9.685 STROKE) REPLACES AP13224 ITEM 2 RAP90480 REPLACES
AP13252 |
|