|
OEM Guide Page HWH SpaceMaker Equipment for FAB METALS, INC. Vehicles (File: MR401790.DOC | Revised: 24MAY17) |
|
PROCEDURE: 1.
Locate the HWH identification tag on the SpaceMaker mechanism to get
the correct mechanism part number. 2.
Find the correct SpaceMaker mechanism part number in the left column
below. 3. Refer to the listed HWH Parts
Manual Page for general replacement parts information and item number
arrangements. 4. Note that two-cylinder mechanisms
with a synchronizing cylinder have two part numbers. One number is for the left assembly and one
is for the right assembly. If the mechanism
assembly originally had one number, that number is listed with the new numbers. |
SLIDE-OUT
Mechanisms
|
||
|
MECHANISM AP24705 |
SINGLE
CYLINDER ROOM EXTENSION
30.0 STROKE AP39366 KIT SEE > MR411100.HTML FOR DRAWING AND PARTS INFORMATION. |
|
|
CYLINDER
ASSEBMLY___________ HOSE
ASSEMBLIES_____________ |
ITEM 1 RAP90949 (31.0
STROKE) REPLACES AP24936 ITEM 3 RAP24632 (AP24632) ITEM 4 RAP53984 (AP53984) |
|
|
MECHANISM AP38251 AP38252 |
UNIVERSAL
STRAIGHT-OUT 30.0
STROKE (WITH SYNCHRONIZING CYLINDER) AP39365
KIT SEE > MR412685.HTML FOR DRAWING AND PARTS INFORMATION. |
|
|
CYLINDER
ASSEMBLY___________ SYNCHRONIZING
CYLINDER______ TUBE
KIT____________________ HOSE
ASSEMBLIES_____________ |
ITEM 1 RAP92076 (30.5 STROKE) REPLACES
AP38072 ITEM 3 RAP92077 (10.540 STROKE) REPLACES AP37881 ITEM 2 RAP92079 REPLACES
AP38267 ITEM 4 RAP24632 (AP24632) ITEM 5 RAP24638 (AP24638) |
|