|
OEM Guide Page HWH SpaceMaker Equipment for (File: MR401150.DOC | Revised: 24MAY17) |
|
PROCEDURE: 1.
Locate the HWH identification tag on the SpaceMaker mechanism to get
the correct mechanism part number. 2.
Find the correct SpaceMaker mechanism part number in the left column
below. 3. Refer to the listed HWH Parts
Manual Page for general replacement parts information and item number
arrangements. 4. Note that two-cylinder mechanisms
with a synchronizing cylinder have two part numbers. One number is for the left assembly and one
is for the right assembly. If the mechanism
assembly originally had one number, that number is listed with the new numbers. |
SLIDE-OUT
Mechanisms
|
||
|
MECHANISM AP10744 |
DUAL
CYLINDER ROOM EXTENSION
73.0 STROKE (WITH RACK SENSING VALVE) AP10733 KIT SEE > MR41.1532.HTML FOR DRAWING AND PARTS INFORMATION. |
|
|
CYLINDER
ASSEMBLY___________ HOSE
ASSEMBLIES_____________ |
ITEM 1 RAP90115 (73.0
STROKE) REPLACES AP1662 ITEM 6 RAP5352 (AP5352) ITEM 7 RAP2446 (AP2446) ITEM 8 RAP6115 (AP6115) ITEM 9 RAP6216 (AP6216) |
|
|
MECHANISM AP10745 |
DUAL
CYLINDER ROOM EXTENSION
73.0 STROKE (WITH RACK SENSING VALVE) AP10734 KIT SEE > MR41.1532.HTML FOR DRAWING AND PARTS INFORMATION. |
|
|
CYLINDER
ASSEMBLY___________ HOSE
ASSEMBLIES_____________ |
ITEM 1 RAP90115 (73.0 STROKE)
REPLACES AP1662 ITEM 6 RAP5352 (AP5352) ITEM 7 RAP2446 (AP2446) ITEM 8 RAP6115 (AP6115) ITEM 9 RAP6216 (AP6216) |
|